EU: ArcelorMittal carbon capture trial in Belgium achieves over 90% CO2 capture from BF gas
...
- Full-scale deployment could cut site emissions intensity by up to 24%
- Multi-point capture approach could enable deeper emissions cuts
ArcelorMittal, Mitsubishi Heavy Industries (MHI), BHP and Mitsubishi Development Pty Ltd (MDP) have completed the first phase of a carbon capture trial at ArcelorMittal's integrated steelmaking site in Ghent, Belgium, demonstrating more than 90% CO2 capture from blast furnace gas at pilot scale.
The trial, which involved more than 4,500 hours of operational testing, was aimed at assessing the applicability of MHI's Advanced KM CDR Process in the demanding operating environment of an integrated steelworks. The results provide operational and engineering data for evaluating the potential deployment of the technology at full scale at the Ghent blast furnace. The site features blast furnaces A and B and BOFs contributing to-5 mnt/year crude steel output.
Assessments based on the trial indicate that applying the technology at full scale to pre-combustion blast furnace off-gas could reduce CO2 intensity at the Ghent site by up to 24%.
The result is significant because blast furnace off-gas is a challenging carbon capture stream, containing CO2 and carbon monoxide (CO), along with dust, sulphur-containing compounds and other contaminants. Successful operation under these conditions strengthens the case for deploying post-and pre-combustion carbon capture technologies in existing integrated steelmaking assets, where replacing the BF-BOF route remains technically and economically challenging.
Moving beyond a single emission point
The second phase of the trial will expand testing to another major emission source within the integrated steelworks -the hot strip mill reheating furnace. The furnace heats steel slabs to temperatures required for rolling and is fired using a combination of steelmaking by-product gases, including coke oven gas, blast furnace off-gas and basic oxygen furnace gas, along with natural gas.
Unlike the first phase, which focused on pre-combustion capture from blast furnace gas, phase 2 will assess CO2 capture from the reheating furnace's post-combustion flue gas. This will expose the capture technology to a different and more dynamic gas composition and provide additional data on how carbon capture can be integrated across multiple emission points within an integrated steelworks.
Potential for deeper emissions cuts
The first-phase results suggest that carbon capture could deliver a material reduction in emissions from the blast furnace route, but capturing CO2 from a single stream does not address all emissions across an integrated steel plant.
The partners therefore see the multi-point approach as potentially more significant. Applying carbon capture across several emission sources could enable deeper reductions and, according to the trial's partners, support progress towards near-zero emissions intensity for blast furnace-based steelmaking.
The phase 2 results are expected to feed into updated engineering and deployment studies for potential full-scale applications.
ArcelorMittal is facilitating the trial at Ghent, while MHI is providing its proprietary Advanced KM CDR Process and leading the carbon capture process engineering and technical evaluation. BHP and MDP are funding the trial as suppliers of steelmaking raw materials to ArcelorMittal's European operations.
The trial thus represents a broader test of whether carbon capture can be scaled from a pilot installation to a plant-wide decarbonisation solution for existing integrated steelworks, rather than being limited to individual emission sources.

